Evaporative Condenser is widely used in energy chemical industry,Pharmaceuticals coal, electricity, industrial refrigeration, beer,beverage,food processing, the cold storage, the building air conditioning refrigeration,etc

 

The food industry                                                          Chemical medicine

Poultry Slaughtering Plant                                              Inter-cooling of methanol/methanol synthetic ammonia compressor

Multi-purpose cold Storage                                            Syngas cooling condensation

Beer and beverage industry                                           Methanol distillation process cooling condensation

Industrial ice/Skating Rink                                              Gas cooling of natural gas or coke gas exchange process

Ice cream factory                                                              Purification process as weoo as cooling condensation

Fish processing industry                                                  Steam condensation of turbine,Ethyl acetate condensation

 

Compared with the traditional condenser,‘HAC’evaporative condenser has the following advantages:

1、Energy Saving

Compared with air cooled condenser, the condensing temperature of evaporative condenser is much lower. Every 1℃ the condensing temperature increased, the power consumption for refrigerating capacity per unit will be increased by 3%~3.5%. So‘HAC’evaporative condenser has better energy conservation effect.

2、Water Conservation

‘HAC’evaporative condenser makes full use of the latent heat from water vaporization, which could reduce the water loss of spraying water effectively. Its very important for the region where lack of water.

3、Compact structure, investment cost low

‘HAC’evaporative condenser has compact structure, small size and less footprint, because its structure equal to one unit that combined condensing coil and cooling tower, no need to equip a cooling tower for it any more.Meanwhile, it effectively reduce the coil heat exchange area, fan quantity and motor power consumption by making full use of evaporative cooling.

4、Environmental-friendly

Many chemical plants use tube and shell type or atmospheric type condenser in the past, and vent depressurization is a way often used in the summer due to its condensing pressure too high, but not all non-condensable gas exhausted, which contains a large amount of ammonia, even high to 90% sometimes according to sampling analysis from relevant departments not only ammonia loss much, but also environmental pollution seriously. But it won’t happen for HAC evaporative condenser.

 

Working Principle

For ZHX series combined flow type evaporative condenser, the coil will soaked fully by spraying water when process fluid flows inside, meanwhile, the heat of working fluid will be transferred by wall of coil tube, and become saturated wet-hot vapor after mixed with water and air, then it will be discharged into atmosphere by fan, but water will be collected into water basin by drift eliminator for recycled spraying, low water consumption. The spraying water temperature will be reduced by PVC infill during the recycling, and it flows in same direction to fresh air, to cool coil mainly by sensible heat conduction way.

 

Advantages:

 

(1)Excellent Heat Exchange Performance

 

Parallel air and water path as well as the combination of coils and PVC fill, this effectively avoid the dry spot and scale formation, and improve the heat exchange performance.

 

(2)Convenient Maintenance

 

Huge maintenance space makes it convenient to inspect the product. Technicians can enter the cooling tower during operation time.

 

(3)Convenient Transportation and Installation

 

The Evaporative condenser is designed to be standard upper body part and bottom body part, making it is able to be shipped separately and saves transportation and installation cost.

 

(4)Slope Water Basin Design

 

Suspended PVC fill and sloped water basin floor toward the drain facilitate cleaning.

MODEL	CAPACITY (M3/h)	FAN			WATER SPRAYING PUMP			INLET/OUTLET DN(MM)	WEIGHT		DIMENSION
		QTY	POWER (K/W)	AIR VOLUME PER SET (M3/h)	QTY	POWER (K/W)	WATER VOLUME PER SET (M3/h)	DN(mm)	SHIPPING (KG)	OPERATIONG (KG)	LENGTH (MM)	WIDTH (MM)	HEIGHT (MM)
ZHX-320	320	1	3	35000	1	1.1	53	DN80	2390	3790	1925	2380	4220
ZHX-430	430	1	4	45000	1	1.1	53	DN100	2510	3910	1925	2380	4220
ZHX-525	525	1	5.5	65000	1	1.5	70	DN100	2760	4340	1925	2580	4220
ZHX-595	595	1	5.5	75000	1	1.5	70	DN100	3290	5140	1925	2900	4220
ZHX-700	700	1	7.5	87000	1	1.5	70	DN100	3680	5530	1925	2900	4965
ZHX-800	800	2	4	45000	1	2.2	100	DN100	4230	7650	3770	2200	4220
ZHX-870	870	2	4	45000	1	2.2	100	DN125	4510	7930	3770	2200	4720
ZHX-980	980	2	4	45000	1	2.2	100	DN125	4620	8040	3770	2200	4965
ZHX-1100	1100	3	3	40000	1	3	150	DN125	6170	10170	4240	2200	4720
ZHX-1250	1250	3	4	45000	1	3	150	2-DN100	6510	10510	4240	2200	4965
ZHX-1380	1380	4	3	45000	1	4	180	2-DN100	7100	11950	5610	2200	4220
ZHX-1520	1520	4	3	40000	1	4	180	2-DN100	7310	12160	5610	2200	4730
ZHX-1680	1680	4	4	45000	1	4	180	2-DN100	7590	12440	5610	2200	4965
ZHX-1840	1840	4	4	45000	1	5.5	233	2-DN125	8920	15580	7450	2200	4220
ZHX-2010	2010	4	4	45000	1	5.5	233	2-DN125	9330	15990	7450	2200	4720
ZHX-2245	2245	4	4	45000	1	5.5	233	2-DN125	9550	16210	7450	2200	4965
ZHX-2450	2450	5	4	45000	1	4	180	4-DN100	11650	19090	9300	2200	4720
ZHX-2600	2680	5	4	45000	1	4	180	4-DN100	12350	19790	9300	2200	4965
ZHX-2820	2820	6	4	45000	1	4	180	4-DN100	12490	19930	9300	2200	4965

Notes:

1.Do not use for construction. This brochure includes data current at the time of publication which should be reconfirmed at the time of purchase

2.All location dimensions for coil connections are approximate and should not be used for prefabrication of connecting piping.